ICOM 348400 Manual De Usuario
New2001
New2001
11
New2001
BASIC OPERATION
2
Power ON the power
■
Hold down [
➥
] for 1 second to turn ON the power.
• A beep sounds and, after “ICOM ID-5100” and power source
voltage are displayed, the operating frequency appears.
• Hold down [
] for 1 second to turn OFF the power.
[ ]
Setting audio volume and
■
squelch level
Rotate [VOL] to adjust the audio level.
q
Rotate [SQL] until the noise and the “BUSY” icon just dis-
w
appear.
• Rotating [SQL] counterclockwise makes the squelch tight. The
tight squelch is for strong signals.
• When rotating [SQL] clockwise beyond the center position,
[SQL] can be used as ‘S-meter Squelch’ or ‘Attenuator.’ Select
the [SQL] option in the Menu screen. (p. ??-??)
the [SQL] option in the Menu screen. (p. ??-??)
[VOL]
[SQL]
[VOL]
[SQL]
Selecting a tuning step
■
Rotating [DIAL] changes the frequency in the selected tuning
steps.
The VFO scan uses this step to search for a signal.
steps.
The VFO scan uses this step to search for a signal.
Tuning steps (kHz)
5
6.25
8.33*
10
12.5
15
20
25
30
50
Auto*
*Appears only when the AIR band is selected.
Tuning step selection
D
Touch the kHz digits for 1 second.
q
• Opens the Tuning step setting window.
Touch the desired tuning step.
w
• Sets the tuning step, and then returns to the previous screen.
• You can set the tuning step for both the VFO and Memory
• You can set the tuning step for both the VFO and Memory
mode.
• You can set the tuning step for each band.
• In the Tuning step setting window, rotating [DIAL] also selects
• In the Tuning step setting window, rotating [DIAL] also selects
the tuning step.