ICOM 349300 Manual De Usuario

Descargar
Página de 100
IN CASE OF EMERGENCY
If your vessel requires assistance, contact other vessels and 
the Coast Guard by sending a Distress call on Channel 16.
Or,  transmit  your  Distress  call  using  digital  selective  calling 
on Channel 70. 
USING CHANNEL 16
DISTRESS CALL PROCEDURE
1.  “MAYDAY MAYDAY MAYDAY.”
2.  “THIS IS ...............” (name of vessel).
3.   Say your call sign or other description of the vessel (AND 
9 digit DSC ID if you have one).
4.  “LOCATED AT ...............” (your position).
5.  State the nature of the distress and assistance required.
6.   Give any other information which might facilitate the res-
cue.
USING DIGITAL SELECTIVE CALLING 
(Ch 70)
DISTRESS CALL PROCEDURE
1.   While  lifting  up  the  key  cover,  hold  down  [DISTRESS] 
for 3 seconds until you hear 3 short beeps and then one 
long beep.
2.   Wait for an acknowledgment on Channel 70 from a coast 
station.
฀ •฀฀After฀ the฀ acknowledgement฀ is฀ received,฀ Channel฀ 16฀ is฀ auto-
matically selected.
3.   Hold down [PTT], then transmit the appropriate informa-
tion as listed above.
ii
INSTALLATION NOTE
Installation:
The installation of this equipment should be made in such a 
manner as to respect the EC recommended electromagnetic 
field exposure limits. (1999/519/EC)
The  maximum  RF  power  available  from  this  device  is  25 
watts. The  antenna  should  be  installed  as  high  as  possible 
for maximum efficiency and the installation height should be 
at least 1.4 meters above any accessible position. In the case 
where an antenna cannot be installed at a reasonable height, 
then the transmitter should neither be continuously operated 
for long periods if any person is within a distance of 1.4 me-
ters of the antenna, nor operated at all if any person is touch-
ing the antenna.
It is recommended that antenna of a maximum gain of 3 dB 
are  used.  If  higher  gain  antenna  are  required  then  please 
contact  your  Icom  distributor  for  revised  installation  recom-
mendations.
Operation:
The exposure to RF electromagnetic field is only applicable 
when  this  device  is  transmitting. This  exposure  is  naturally 
reduced due to the nature of alternating periods of receiving 
and  transmitting.  Keep  your  transmissions  to  the  minimum 
necessary.