ICOM 349500 Manual De Usuario
12
4
BASIC OPERATION
12
N Call channel programming
The Call channel key is used to select Channel 9* by default.
However, you can program your most often-used channel in
each channel group for quick recall.
However, you can program your most often-used channel in
each channel group for quick recall.
* The channel may differ, depending on the transceiver version.
Hold down
q
;#(78s5)#= for 1 second several times to
select the desired channel group
(USA, INT, CAN, ATIS)
to
be programmed.
w Hold down ;#= for 1 second to se-
lect the Call channel.
s
pear.
Hold down
e
;#= again for 3 sec-
onds
(until a long beep changes to 2
short beeps)
to enter the Call channel
programming mode.
s
grammed blinks.
r Push
[
Y]/[Z]
to select the desired
channel.
Push
t
;#= to program the displayed
channel as the Call channel.
s
N Lock function
This function electronically locks all keys
(except for [PTT],
[
]
and
;(,s,/#+=)
to prevent accidental channel changes and
function access.
± Push ;(,s,/#+= for 1 second to turn the lock function
± Push ;(,s,/#+= for 1 second to turn the lock function
ON or OFF.
Hold down
for 1 second
Appears while the lock
function is in use.
function is in use.
N Monitor function
The monitor function releases the noise squelch mute to
check the volume level. See page 27 for details of the monitor
switch action.
check the volume level. See page 27 for details of the monitor
switch action.
± Hold down [
] for 1 second to activate the monitor func-
tion.
s
” and “
” appear and audio is heard.
Appears while the
monitor function is
in use.
monitor function is
in use.
Hold down
for 1 second