ICOM 366400 Manual De Usuario
5
MENU SCREEN
5-3
Menu functions
Autodial “AUTO DIAL”
Opens the DTMF Autodial code selection screen.
Opens the DTMF Autodial code selection screen.
When “AUTO DIAL” is displayed, push [P1](ENT).
q
• The first entry in the Autodial list appears.
Push [UP] or [DOWN] to select a desired number.
w
Push [P3](TX) to send.
e
When the Store & Send function is enabled:
When “AUTO DIAL” is displayed, push [P1](ENT).
q
• “CODE?” appears.
Push [UP] or [DOWN] to enter a digit, and then push
w
[P1](SEL) to set.
• Goes to the next digit entry position.
• You can use the 10-keypad keys on the optional DTMF
• You can use the 10-keypad keys on the optional DTMF
microphone.
Repeat step
e
w
until you enter up to 30 digits.
• Push [P0](DEL) to delete the entered digit.
• Push [P1](EXIT) to exit the DTMF Code Entry mode.
• Push [P2](MODE) to toggle between the DTMF Code En-
• Push [P1](EXIT) to exit the DTMF Code Entry mode.
• Push [P2](MODE) to toggle between the DTMF Code En-
try mode and the DTMF Autodial code selection mode.
Push [P3](TX) to send.
r
Autodial Programming “AUTDIAL PRGM”
Enters the DTMF Code Programming mode.
Enters the DTMF Code Programming mode.
When “AUTDIAL PRGM” is displayed, push [P1](ENT).
q
• The first entry in the Autodial list appears.
Push [UP] or [DOWN] to select a desired number.
w
Push [P1](ENT).
e
• Enters the Name Entry mode. (p. 3-3)
AUX A “AUX A”
Turns the AUX A port ON or OFF.
Turns the AUX A port ON or OFF.
When “
q
AUX A” is displayed, push [P1](ENT).
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
AUX B “AUX B”
Turns the AUX B port ON or OFF.
Turns the AUX B port ON or OFF.
When “
q
AUX B” is displayed, push [P1](ENT).
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
Broadcast “BROADCAST”
❍
❍
In the NXDN Trunking system
Turns the Broadcast Call ON or OFF.
This item can also be used to make a Broadcast Group
Call.
This item can also be used to make a Broadcast Group
Call.
When “BROADCAST” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
When “ON” is selected in step w, push [PTT] to send
the Broadcast Group Call.
Direct CH/GID 1 Select to Direct CH/GID 5 Select
“DIRECT CHGD1” to “DIRECT CHGD5”
Sets the selected channel or GID to a Direct CH/GID
between 1 and 5.
“DIRECT CHGD1” to “DIRECT CHGD5”
Sets the selected channel or GID to a Direct CH/GID
between 1 and 5.
Select a desired channel. (p. 2-4)
q
Push [MENU].
w
• Opens the Menu screen.
When a channel between “DIRECT CHGD1” and
e
“DIRECT CHGD5” is displayed, push [P1](ENT).
• Sets the selected channel to a Direct channel between 1
and 5.
Display Format “DISP FORMAT”
❍
❍
In the Analog mode or
NXDN Conventional system
Toggles the display format between the channel name
and the zone and channel number.
and the zone and channel number.
❍
In the NXDN Trunking system
Toggles the display format between the GID name and
the GID number.
the GID number.
When “DISP FORMAT” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select “CH NAME” or
Push [UP] or [DOWN] to select “CH NAME” or
w
“ZONE-CH No.”
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
External Speaker “EXT SPEAKER”
Turns the External speaker function ON or OFF.
When the External speaker function is ON, the PA
speaker that is connected to the D-Sub 15-pin will ac-
tivate.
Turns the External speaker function ON or OFF.
When the External speaker function is ON, the PA
speaker that is connected to the D-Sub 15-pin will ac-
tivate.
When “EXT SPEAKER” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e