ICOM 369700 Manual De Usuario
7
3
Bluetooth
®
OPERATION
■
Pairing with a headset
These instructions describe pairing with the VS-3 Bluetooth
®
headset
as example. You can pair a maximum of 7
Bluetooth
®
headsets with the transceiver.
• If you try to pair a Bluetooth
®
headset to a transceiver that already
has 7 headsets paired with it, the oldest headset will automatically
be unpaired.
1. Turning ON transceiver’s Bluetooth
®
function
1) Open the “BLUETOOTH FUNC” menu.
2) Activate the Bluetooth
®
unit.
➥
Select “ON” and push [ /MHz/GRP].
2. Entering the Pairing mode of the VS-3
• See the VS-3’s instruction manual for details.
3. Pairing the Bluetooth
®
headset
1) Open the “DEVICE SEARCH” menu.
3) Select the desired headset to pair.
➥
Push [∫] or [√] and then push [ /MHz/GRP].
• A passkey or PIN code may be required to pair,
depending on the headset. Refer to your headset’s
instructions for details.
4) Exit the Menu mode.
➥
Push [ ].
• “ ” is displayed if the headset is correctly paired.
■
Connecting a paired headset
If you have a previously paired headset, follow the steps
below to connect it.
1) Open the “PAIR/CONNECT” menu.
MENU > BLUETOOTH > PAIR/CONNECT
• The paired headsets are displayed.
2) Select the desired headset to connect.
➥
Push [∫] or [√] and then push [ /MHz/GRP].
• “CONNECT” and “UNPAIR” is displayed.
3) Connect the headset.
➥
Select “CONNECT” and then push
[ /MHz/GRP].
• The check mark “4” in the box is displayed.
4) Exit the Menu mode.
➥
Push [ ].
2) Search for a headset to pair.
➥
Select “HEADSET” and push
[ /MHz/GRP].
• The found headsets are displayed.
• “NOT FOUND” is displayed if no
headset is found.
• Push [MENU/CLR] to cancel
searching.
• The headset name changes to
its Bluetooth
®
device address in
5 seconds.
MENU > SETTINGS > BLUETOOTH >
BLUETOOTH FUNC
MENU > BLUETOOTH > PAIR/CONNECT >
DEVICE SEARCH