ICOM 374000 Manual De Usuario

Descargar
Página de 2
9. ABOUT THE KEY OPERATIONS
10. About the Call types Calling party
11. Making a Call
Hold down 
[PTT], and speak into the microphone.
 [TX/RX] indicator lights red while [PTT] is pushed.
1
When receiving a call, [TX/RX] indicator lights green.
2
Turning OFF the power
Turn [PWR/VOL] maximum counter 
clockwise.
8. TURNING ON THE POWER/ADJUSTING THE AUDIO LEVEL
Turning ON the power
Adjusting the audio output level
Turn 
[PWR/VOL] to adjust the audio output level.
Set the output to a suitable level.
 •A volume level between 0 and 32 is displayed.。
Turn 
[PWR/VOL] clockwise to set the 12 O'clock position.
 A beep sounds.
※ The dial is made physically tight for the dust and water resistance.
The signal strength is represented by 3 bars indication.
In the 3G mode, the resceived signal strength is indicated by the 
 icon. 
In the LTE mode, 
 icon is displayed.
※When the terminal is out of the service area, or cannot receive the signal, 
 (out-of-service) icon blinks.
NOTE:  If the output level is set to the minimum level, the beep does not 
sound.
Standby screen
Standbyscreen
Turn
Turn
全体
 10/4 12:57
音量:
10
All Call transmitting screen
全体
 10/4 12:57
全体
 10/4 12:58
Blinks when receive a Call
Turn
[Call List address book] key
When making a group or
individual call, select calling
party from this list.
Push this button again to switch the radio screen for 
“All Call”,“Group Call” or “Individual Call” address 
book.
[Function] key
Selects the message to send, 
Presence or Talk group.
個別 00005
集合してください
メッセージ
(Example: A message is selected.)
All Call receiving screen
When Address Book is activated, the radio will display calling party. 
Otherwise the radio pre‐programmed calling party will be displayed.
[▲]/[▼] key
Push to scroll the address book or 
call history table.
全体
 10/4 12:57
営業8
 10/4 12:57
All Call screen
Individual Call Screen
Calling Mode Icons*
 
 : All Group Call
 
 : Group Call
 
 : Individual Call
 
 : Phone Call
While receiving a call, push [PTT] to talk in the full duplex 
mode*.
  In the Full Duplex mode, [
TX/RX indicator lights orange.
* Depending on the presetting, ask your dealer for detail.
3
※ Instructions and screens on this guide may differ, depending on the settings.
★ Can be used, depending on the presetting.
*
 Blink when a call or message is received.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the 
United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries.
A?????-?EX 
Printed in Japan
 
© 2017  Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
[Call history] key
Repeatedly push to select call history from the TX log, 
RX log, TX MSG log, RX MSG log, TX TEL log or RX 
TEL log.
•  Selectable log may differ, depending on the IP1000C 
settings.
•  Push [Up]/[Dwn] to select a desired log.
•  Hold down until “Emergency” is displayed to send an 
emergency call, depending on the settings.
個別
個別 00001
00001
Address book: Individual
[CLR/LOCK] key
Push to bring back normal 
operating screen from a function 
screen such as Call History 
screen.
Hold down to turn the key lock 
ON or OFF.
※ [PTT] key and [PWR/VOL] dial 
can be operated even while in 
the Key Lock function is acti-
vated.
全体
 10/4 12:57
(Example: Key Lock falling munction is ON.)
 Lights red 
 Lights orange
 Lights green
Hold down
Hold down
Microphone
Microphone
Speaker