ICOM 400401 Manual De Usuario

D

 •BP-278/BP-279/BP-280 BATTERY PACKS 

7.2 V

1130 mAh

(minimum)

1190 mAh

(typical)

9 hours

7.2 V

1485 mAh

(minimum)

1570 mAh

(typical)

11.5 hours

7.2 V

2280 mAh

(minimum)

2400 mhA

(typical)

18 hours

 *  When the power save function is turned ON, and the 

operating periods are calculated under the following 

conditions. 

TX : RX : standby = 5 : 5 : 90

D

 •BC-213 DESKTOP CHARGER + BC-123S AC 

ADAPTER

 To rapidly charge a single battery pack.

 •BC-214 MULTI CHARGER + BC-157S AC ADAPTER

 To rapidly charge up to 6 battery packs.

D

 •CP-23L CIGARETTE LIGHTER CABLE

   Use when charging the battery pack from a 12 V 

cigarette lighter socket. (Use with the BC-213)

 •OPC-656 DC POWER SOCKET

   Use with a 13.8 V power source instead of the power 

adapter. (Use with the BC-214)

D

 •FA-SC25U/FA-SC57U/FA-SC72U/FA-SC73US UHF 

ANTENNAS

  FA-SC25U: 400–430 MHz

  FA-SC57U: 430–470 MHz

  FA-SC72U: 470–520 MHz

  FA-SC73US: 450–490 MHz

 •FA-SC26US UHF STUBBY ANTENNAS

  FA-SC26US: 400–450 MHz

 •FA-SC01U/FA-SC02U UHF ANTENNAS

  FA-SC01U: 350–400 MHz

  FA-SC02U: 330–380 MHz

 •FA-SC61UC UHF CUT ANTENNAS

  FA-SC61UC: 380–520 MHz

D

    (For only the Simple key types and Ten-key types)
  1 

2  3  4  5  6  7 

8

9

10

11

1 

    Displays the relative receive signal strength level.
2 

    Displayed when low output power is selected.

 

L

 Low out power is automatically selected when the 

battery is discharged less than set level.

3 

 • Displayed when the channel is in the ‘Audible’ 

(unmuted) mode. 

 • Displayed when a matched 2-Tone or 5-Tone is 

received.

4 

     Displayed when the GPS signal is received, depending 

on the presetting.

5 

     Displayed when the Encryption function is ON.
6 

     Displayed or blinks when a matching signal is received, 

depending on the presetting.

7 

    Displayed or blinks while scanning.
8 

     Displayed when the Key Lock function is ON.
9 

 • Displays the remaining battery charge.

 • Blinks when the battery charge decreases to a set 

level.

Indication

Battery 

Status

Full

Mid

Charging 

required

Battery 

exhausted

10 

    Displays messages such as channel text.
11 

    Displayed when [SHIFT] is pushed.

D

NOTE: Before using the transceiver for the first time, the 

battery pack must be fully charged for optimum life and 

operation. See the BATTERY CHARGING section.

Rotate [VOL] to turn ON the transceiver.

D

1.  Select a channel.

 

L

 Rotate [Rotary Selector] or push [Up] or [Down], 

depending on the presetting.

2.  When receiving a call, rotate [VOL] to adjust the audio 

output level to a comfortable listening level.

NOTE: Depending on the presetting, the transceiver may 

automatically transmit the microphone audio for the preset 

time period when a matching signal is received. (Auto TX 

function)

CAUTION: Attach an antenna before transmitting. 

Transmitting without an antenna may damage the 

transceiver.

1. Wait until the channel is clear to avoid interference.

2.  While holding down [PTT], speak at your normal voice 

level.

3. Release [PTT] to receive. 

To maximize the readability of your signal:

1.  After pushing [PTT], pause briefly before you start 

speaking.

2.  Hold the microphone 5 to 10 cm (2 to 4 inches) from 

your mouth, then speak at your normal voice level.

D

 You can use the Key Lock function to prevent accidental 

channel changes and unnecessary function access, 

depending on the presetting.

All assignable keys except the following are electronically 

locked: [Monitor], [Light], [Lock], [Call], [Emergency], and 

[Surveillance]. 

You can also make or receive calls, or turn the transceiver 

ON or OFF, during the Key Lock function is ON.

 

z

Hold down [LOCK] for 1 second to turn the Key Lock 

function ON or OFF.

    For only the Simple-key and Ten-key types:

 • “

” is displayed when the Key Lock function is ON.

 • “

” disappears when the Key Lock function is OFF.

D

If the [AquaQuake] is assigned to a key, the AquaQuake 

Water Draining function clears water from the speaker grill 

to maintain clear audio by vibrating the speaker cone.

1.  Hold down [AquaQuake] to turn ON the AquaQuake 

water draining function.

 • A low frequency vibration is generating to remove 

water from the speaker grill.

 • Water in the speaker grill may muffle the sound 

coming from the speaker.

2.  Release the key to turn OFF the function.

 •After the specified period of time expires, this function 

automatically stops, even if a user continues to hold 

down this key.

 •This key works for only the internal speaker.

NOTE: Before detaching or attaching a battery pack, 

BE SURE to turn OFF the transceiver by rotating [VOL] 

fully counter clockwise, until it makes a “click” sound. 

Otherwise, a transceiver malfunction could occur.

D

You can rapidly charge the Li-ion battery pack with the  

BC-213.

BC-213: Approximately 3.5 hours for the BP-280

 • A power adapter (may be supplied with the charger,  

depending on the charger version).

D

You can rapidly and simultaneously charge up to 6 battery 

packs with the optional BC-214. 

Approximately 2 to 3 hours for the BP-280

 • The BC-157S AC ADAPTER or the OPC-656 DC POWER 

CABLE

CAUTION: DO NOT reverse the polarity when connecting 

the OPC-656 to a power source. This will ruin the battery 

charger.

White line: +, Black line: _

The CP-23L (for a 12 V cigarette lighter socket) can be 

used instead of the power adapter.

*  A different type, or no power adapter is supplied, 

depending on the charger version.

*1:  Charger adapter’s shape may differ, depending on the 

charger version.

*2:  A different type, or no power adapter is supplied, 

depending on the charger version.

2

To an 

AC outlet

Connect to a DC power supply:

12 to 16 V, at least 7 A

White line: +, Black line: _

D

 •MB-130 CHARGER BRACKET

   Mounts the BC-213 desktop charger on a variety of 

places in a vehicle.

 •MB-133 BELT CLIP

 •HM-158LA/HM-159LA/HM-168LWP/HM-171GPW  

SPEAKER MICROPHONE

   Combination speaker-microphone that provides 

convenient operation while the transceiver is hanging on 

your belt.

   The HM-171GPW includes high-performance GPS 

receiver.

 

L

Adjust the microphone gain before use.

 •HM-153LA/HM-166LA EARPHONE MICROPHONE 

   Ideal for hands-free operation. Clip the HM-153LA or 

HM-166LA (with integrated PTT switch) to your lapel or 

breast pocket.

 

L

Adjust the microphone gain before use.

 •HS-94/HS-95/HS-97 HEADSET  

+ VS-4LA PTT SWITCH CABLE/OPC-2004LA 

ADAPTER CABLE

  HS-94: Ear-hook type

  HS-95: Neck-arm type

  HS-97: Throat microphone

  VS-4LA: To connect to headsets

  OPC-2004LA: To connect to headsets for VOX operation

 

L

Adjust the both microphone and VOX gain before use.

 •HS-94LWP/HS-95LWP HEADSET

  HS-94LWP: Ear-hook type

  HS-95LWP: Neck-arm type

 

L

Adjust the both microphone and VOX gain before use.

Some options may not be available in some countries.  

Ask your dealer for details.

D

Lights red: 

Transmitting.

Lights green: 

Receiving or squelch is open.

Lights or blinks orange:  A matching signal is received, 

depending on the presetting.

Slowly blinks green: 

The battery should be charged.

Blinks green fast: 

The battery is exhausted.

D

CAUTION: DO NOT use the transceiver without the jack 

cover or the optional equipment attached.

The transceiver meets IP67 requirements for dust-tight 

and waterproof protection only when the jack cover or 

the optional HM-168LWP, HM-171GPW, HS-94LWP, or 

HS-95LWP is attached.

Ten-key*

There are 3 types of transceivers in the IC-F2100D series.

 •

IC-F2100D:  Non-display type

 •

IC-F2100DS:  Simple key type

 •

IC-F2100DT: Ten-key type

The illustration below shows the ten-key type transceiver.

*1: The key functions are dealer assignable.

*2: Only for the Simple key and Ten-key types.

*3: Only for the Ten-key type.

1

Lights orange: Charging

Lights green:  Charged