ICOM AP-3 Manual De Usuario

SETTING SCREENS

8

51

■

This setting item is used to set whether or not routing will
be used between the wired LAN and the wireless LAN.

(default setting: No)

It is necessary to restart the AP-3 unit to activate any set-
ting changes. 
* When “No” is selected, the wired LAN and the wireless

LAN are handled as though they are in the same subnet
(i.e., same network) and, therefore, the roaming func-
tion (

☞

p. 46) can be used. In this case, the IP address

and subnet mask settings under [Wired LAN] on the
[AP-3 Network Settings] screen are used for the wire-
less LAN.

When “Yes” is selected, the wired LAN and the wireless
LAN are handled as though they are in different subnets
(i.e., separate networks). In this case, the IP address
and subnet mask settings under [Wireless LAN] on the
[AP-3 Network Settings] screen are used for the wire-
less LAN.

■

q
w

q

This setting item is used to set the wired LAN and wire-
less LAN IP addresses.

●

Wired LAN default setting

: 192.168.0.1

●

Wireless LAN default setting : 192.168.1.1

Setting changes will not take effect until the AP-3 unit is
restarted.

w

This setting item is used to set the wired LAN and wire-
less LAN subnet masks.

●

Wired LAN default setting

: 255.255.255.0

●

Wireless LAN default setting : 255.255.255.0

Setting changes will not take effect until the AP-3 unit is
restarted.

When the [Routing Mode Setting] is set to “No” (default),
the AP-3 unit will operate using the IP address and sub-
net mask entered under [Wired LAN] for the wireless
LAN.