ICOM ic-m402 Manual De Usuario

■

The 9-digit MMSI (DSC self ID) code can be programmed at
power ON.

This function is not available when the MMSI code has
been programmed by the dealer. This code programming
can be performed only 2 times.

q

Turn power OFF.

w

While pushing [DSC], turn power ON to enter MMSI code
programming condition.

e

After the display appears, release [DSC].

r

Select the desired number by pushing [

Y

]/[

Z

] . 

t

Push [H/L] to advance the cursor.

• Push [CH/WX] to move the cursor backward.

y

Repeat steps 

r

and 

t

to input 9 digit

code.

u

Push [DSC] to input and set the code.

• The previously selected channel appears.

■

The 9-digit MMSI (DSC self ID) code can be checked.

q

Push [DSC] to select the DSC menu.

w

Push [

Y

]/[

Z

] to select “MMSI” and

push [DSC].

e

Check the 9-digit MMSI (DSC self ID)
code.

r

Push [DSC] to exit the condition.

■

When an optional GPS receiver (NMEA0183 ver. 2.0) is con-
nected, the transceiver can display the current position and time. 

A GPS receiver appropriate for the IC-M402 is not supplied from
Icom. An NMEA0183 ver. 2.0 is required for position indication.
Ask your dealer about the GPS receiver.

➥

While pushing [H/L], push  [DSC] for 1 sec. to display the cur-

rent position.

•“Latitude and longitude are displayed alternately.

TAG

GPS

TAG

GPS

11

6

D

TAG

D

TAG