ICOM ic-m402 Manual De Usuario

20

8

Scan mode

Weather alert

Scan resume timer

Dual/tri watch

DSC watch

LCD contrast

WX ALT

Beep tone

Push

■

Set mode is used to change the conditions of some of the
transceiver’s functions.

• Available functions may differ depending on dealer setting.

• The optional HM-127 has it’s own settings for the beep

tone and LCD contrast.

q

Turn power OFF.

w

While pushing [16], turn power ON to enter set mode.

e

After the display appears, release [16].

r

Push [16] to select the desired item, if necessary.

t

Push [

Y

]/[

Z

] to select the desired condition of the item. 

y

Turn power OFF, then ON again to exit set mode.

■

The scan mode can be se-
lected as a normal scan or
priority scan. (p. 9)

The scan resume timer can
be selected as a pause
(OFF) or timer scan (ON).
When OFF is selected, the
scan pauses until the signal
disappears. When ON is selected, the scan pauses 5 sec. and
resumes even if a signal is being received on channels except
for Channel 16.

An NOAA broadcast sta-
tion transmits a weather
alert tone before important
weather information. When
the weather alert function is turned ON, the transceiver detects
the alert, then flashes the “WX ALT” indicator until the trans-
ceiver is operated. The previously selected (used) weather
channel is checked any time during standby or while scanning.

• “ALT” appears with “WX” indication when the function is set ON.

Normal scan (default)

Priority scan

Scan timer OFF (default)

Scan timer ON

Weather alert ON

WX ALT

Weather alert OFF (default)

WX