ICOM ic-m402 Manual De Usuario
3
2
PANEL DESCRIPTION
■
Function display
q
TRANSMIT INDICATOR (p. 6)
“TX” appears while transmitting.
“TX” appears while transmitting.
w
BUSY INDICATOR (p. 6)
“BUSY” appears when receiving a signal or when the
squelch opens.
“BUSY” appears when receiving a signal or when the
squelch opens.
e
TAG CHANNEL INDICATOR (p. 10)
Appears when a tag channel is selected.
Appears when a tag channel is selected.
r
CALL CHANNEL INDICATOR
“CALL” appears when the call channel is selected. (p. 5)
t
LOW POWER INDICATOR (p. 6)
“LOW” appears when low power is selected.
y
DUPLEX INDICATOR (p. 5)
Appears when a duplex channel is selected.
Appears when a duplex channel is selected.
u
WEATHER CHANNEL INDICATOR (p. 5, 36)
➥
“WX” appears when a weather channel is selected.
➥
“ALT” appears when the weather alert function is in use;
flashes when an alert tone is received.
flashes when an alert tone is received.
i
GPS INDICATOR
➥
“GPS” appears while valid position data is received.
➥
“GPS” blinks when invalid position data is received.
➥
“GPS” disappears when no GPS receiver is connected.
o
DSC INDICATOR
➥
Indicates the DSC status. (p. 14)
!0
CHANNEL NAME INDICATOR
➥
Channel comment appears if programmed. (p. 7)
➥
“
” scrolls when the battery voltage drops to
approx. 10 V DC or below.
➥
“
” appears during dualwatch; “
” appears during
tri-watch. (p. 8)
!1
CHANNEL NUMBER READOUT
➥
Indicates the selected operating channel number. “A”
appears when a simplex channel is selected. (p. 5)
appears when a simplex channel is selected. (p. 5)
➥
In set mode, indicates the selected condition. (p. 20)
!2
CHANNEL GROUP INDICATOR (p. 5)
Indicates whether a U.S.A. (USA), International (INT), or
Canadian (CANADA) channel is in use.
Indicates whether a U.S.A. (USA), International (INT), or
Canadian (CANADA) channel is in use.
U
C
I
LOW
D
WX ALT
CALL
BUSY
BUSY
TX
TX
TAG
GPS DSC
POS REPLY
w
q
e
r
r
t
y
i
o
u
!0
!1
!2