Cal-Comp Electronics & Communications Company Limited DTU110 Manual De Usuario
13
Do not allow any liquids or metal objects such as screws, staples
or paper clips to enter the drive. Foreign objects may create a
short circuit, which may cause product damage and fire,
possibly resulting in serious injury.
or paper clips to enter the drive. Foreign objects may create a
short circuit, which may cause product damage and fire,
possibly resulting in serious injury.
Do not use the drive when there is an abnormality in metal parts
and plastic parts, as it may result in electric shock.
and plastic parts, as it may result in electric shock.
Do not use the drive if the drive have been dropped or damaged,
as it may result in electric shock.
as it may result in electric shock.
If the Product produces an odor, overheats or smokes,
immediately turn off the drive and disconnect the power cord
from the outlet and disconnect the USB cable from the device.
Failure to do so may result in fire, damage to the drive and/or
personal injury including burns and electric shock. Do not use
the drive again. Please contact the store from which you
purchased it.
immediately turn off the drive and disconnect the power cord
from the outlet and disconnect the USB cable from the device.
Failure to do so may result in fire, damage to the drive and/or
personal injury including burns and electric shock. Do not use
the drive again. Please contact the store from which you
purchased it.
Do not plug the AC adaptor into a power source that does not
correspond to the voltage, current and the frequency specified
on the regulatory label of the unit. An overload on the socket
and/or AC adaptor may cause a fire or electric shock, possibly
resulting in serious injury.
correspond to the voltage, current and the frequency specified
on the regulatory label of the unit. An overload on the socket
and/or AC adaptor may cause a fire or electric shock, possibly
resulting in serious injury.
Do not pull on the power cable/cord to remove a plug from a
socket. Always grasp the plug directly. Pulling a power
cable/cord may cause fracture resulting in a fire or electric shock
and serious injury.
socket. Always grasp the plug directly. Pulling a power
cable/cord may cause fracture resulting in a fire or electric shock
and serious injury.
Always confirm that the power plug has been fully inserted into
the socket, to ensure a secure electrical connection. An overload
on the socket may cause a fire or electric shock, possibly
resulting in serious injury.
the socket, to ensure a secure electrical connection. An overload
on the socket may cause a fire or electric shock, possibly
resulting in serious injury.
Always make sure the drive and AC adaptor have adequate
ventilation and are protected from overheating when the AC
adaptor is connected to a power outlet. Inadequate ventilation
may cause the drive and AC adaptor to overheat resulting in a
fire or electric shock and serious injury.
ventilation and are protected from overheating when the AC
adaptor is connected to a power outlet. Inadequate ventilation
may cause the drive and AC adaptor to overheat resulting in a
fire or electric shock and serious injury.
If dust gets on the power plug connectors or connector base,
turn the power off and disconnect the power plug. Then clean
the connector and/or connector base with a dry soft cloth.
Failure to do so may cause a fire or electric shock, possibly
resulting in serious injury.
turn the power off and disconnect the power plug. Then clean
the connector and/or connector base with a dry soft cloth.
Failure to do so may cause a fire or electric shock, possibly
resulting in serious injury.
Avoid extended contact between the drive and your skin. The
drive may become hot! Avoid prolonged contact to prevent
skin irritation and/or heat injury.
drive may become hot! Avoid prolonged contact to prevent
skin irritation and/or heat injury.
Avoid extended contact between the AC adaptor and your skin.
The AC adaptor may become hot! Avoid prolonged contact to
prevent skin irritation and/or heat injury.
The AC adaptor may become hot! Avoid prolonged contact to
prevent skin irritation and/or heat injury.