Canberra Industries RMSA7070822 Manual De Usuario
5.2 Loading Collected RMSA Data
The RMSA Review GUI is designed to work in two ways:
• In Remote Review Mode the GUI loads one or more day files from the Translator’s
Samba-mounted /home partition for review and analysis.
• In Local Host Mode an active network connection is made between the RMSA
application running on the Translator and the Remote Review GUI. In this mode, as
seal messages are received by the Translator and stored in a day file, the messages
are also sent immediately to the GUI providing a “live” view of RMSA message activity.
In local host mode, the GUI operator can also demand seal data by requesting an
immediate State-of-Health (SOH) message or a resend of a previous seal message.
seal messages are received by the Translator and stored in a day file, the messages
are also sent immediately to the GUI providing a “live” view of RMSA message activity.
In local host mode, the GUI operator can also demand seal data by requesting an
immediate State-of-Health (SOH) message or a resend of a previous seal message.
In both modes, the GUI controls the number of records loaded for review in order to avoid
resource issues on the Host PC. Operating procedures for each mode are further described in
the remainder of this section as is the procedure for configuring the maximum number of
records available for viewing. Operating procedures for data analysis and for demand of seal
data are provided in sections 5.3 and 5.4 of this chapter.
resource issues on the Host PC. Operating procedures for each mode are further described in
the remainder of this section as is the procedure for configuring the maximum number of
records available for viewing. Operating procedures for data analysis and for demand of seal
data are provided in sections 5.3 and 5.4 of this chapter.
Both Remote Review and Local Host operations require the GUI operator to have access to
the same key file(s) used to configure the seal personality in order to properly decrypt and
authenticate the seal data.
the same key file(s) used to configure the seal personality in order to properly decrypt and
authenticate the seal data.
5.2.1 Remote Review Operation
Perform the following steps to operate the RMSA Review GUI in Remote Review mode:
• Ensure the Translator is operational and a PC LAN connection has been established
between the Host PC and the Translator (refer to section 5.1, above).
• Establish the Samba connection between the Host PC and the Translator using the
Tools->Map Network Drive function in an Explore window. The drive folder will be
\\10.10.16.72\share. Click on Connect Using a Different Username and enter
Username “smbuser” and password “asdfqwer”. (Note that this factory default
password can be changed by the user prior to Translator deployment.)
\\10.10.16.72\share. Click on Connect Using a Different Username and enter
Username “smbuser” and password “asdfqwer”. (Note that this factory default
password can be changed by the user prior to Translator deployment.)
• Start the RMSA Review GUI via Start->All Programs->RMSA Review. A window
similar to the following should appear:
REMOTELY MONITORED SEAL ARRAY(RMSA)
SFG-MAN-001
REVISION: 1.7
2016 CANBERRA
41