ODSONIC INTERNATIONAL CO. LIMITED 9200N Manual De Usuario

- 17 -

3.5 Sensor Alarm Settings and Applications

3.5.1 PIR Sensor

- After pairing the sensor, click “PIR” to enter the settings interface.

- Unit: Sensor number, First one is 1

，second one is 2, and so on.

- Nickname: Modify the name of the sensor; press “set” after you

have renamed the sensor.

- Alarm: Enable or Disable the sensor.

- Location

：This is the position where the Camera will turn to when

this PIR unit is triggered.

- Using your finger in the Control Area, scroll the view to where you want the Camera to point to when this

sensor is triggered, then press the Location Icon to save the position.

3.5.2 Door/Window Contact Sensor

- After pairing the sensor, click “Door Open Detector” to enter the

settings interface.

- Unit: Sensor number, First one is 1

，second one is 2, and so on.

- Nickname: Modify the name of the sensor; press “set” after you

have renamed the sensor.

- Alarm: Enable or Disable the sensor.

- Location

：This is the position where the Camera will turn to when

this PIR unit is triggered.

- Using your finger in the Control Area, scroll the view to where you want the Camera to point to when

this sensor is triggered, then press the Location Icon to save the position.

Quick Reminder..

“Alarm” must be "Enabled" to save the “Location”. After setting the “Location”, please use
the APP function to pan or tilt the Camera. If you use external force to move the camera, the
“Location” setting will not work as intended.

Control Area