Fibar Group S.A. FGDW002 Manual De Usuario

2

 

Read this manual before attempting to install the device! 
Failure to observe recommendations included in this manual 

may be dangerous or cause a violation of the law. The manufacturer,  

Fibar Group S.A. will not be held responsible for any loss or damage 

resulting from not following the instructions of operating manual.
The alarm functionality of devices is an additional feature increasing 

the comfort level  of your home automation system. If you want to 

use professional security service, please contact them to determine 

what systems can provide a protection of your estate.

Compliance with safety standards:
The device is designed to be used in Z-wave home automation sys-

tems (e.g. FIBARO) and is complaint with IEC/UL/CSA 60950-1. In case 

of the integration with another system, e.g. alarm system, it is re-

quired to verify the compliance with additional standards.

FIBARO is a wireless smart home automation system, based on the 

Z-Wave protocol. All of available devices can be controlled through 

a computer (PC or Mac), smartphone or tablet. Z-Wave devices are 

not only receivers, but can also repeat the signal, increasing the 

Z-Wave network’s range. It gives advantage over traditional wireless 

systems that require direct link between transmitter and receiver, as 

a result the construction of the building could affect network’s range 

negatively.
Every Z-Wave network has its unique identification number (home 

ID). Multiple independent networks can exist in the building without 

interfering. Transmission security of FIBARO System is comparable to 

wired systems.
Z-Wave technology is the leading solution in smart home automation. 

There is a wide range of Z-Wave devices that are mutually 

compatible, independently of manufacturer. It gives the system the 

ability to evolve and expand over time. For more information visit  

www.fibaro.com.