CartaSense Ltd. URSENSOR01 Manual De Usuario
Installation assumptions
38
Version; 1.3
Appendix-B: Ethernet USG installation and setup
process
The installation process installs XPORT USG at customer premises.
B.1:
Installation assumptions
The installation process is based on the assumptions that:
USG is defined in the Amplia server.
Lancusrouter is running at known IP port.
Communication server is running.
There is a network with DHCP server in the site.
B.2:
Tools
The installation process and the trouble shooting require the following tools:
Laptop
Ethernet cable to connect the USG to Laptop directly.
Lantronix DeviceInstaller software installed.
ZOC terminal software
6
.
B.3:
Starting the installation
Connect the USG to the network via the Ethernet cable and power it on. The
expected sequence as reflected by the LEDs is: all LEDs are on - means that
the USG is has connected to the server and after that the green LED blinks. If
this is the case, the installation ends here and the activity of the USG can be
monitored by the browser thru the web interface
expected sequence as reflected by the LEDs is: all LEDs are on - means that
the USG is has connected to the server and after that the green LED blinks. If
this is the case, the installation ends here and the activity of the USG can be
monitored by the browser thru the web interface
6
See - http://www.emtec.com/zoc/.