Bang & Olufsen Medicom a/s BETAC1 Manual De Usuario
15
Problem
Cause
Solution
4. Hold on-/off button to shut down
BETACONNECT
TM
and turn it on
again.
If the problem is not solved
contact your MS nurse /
healthcare professional.
If the problem is not solved
contact your MS nurse /
healthcare professional.
A red blinking light is shown on
the BETACONNECT
the BETACONNECT
TM
.
1. The injection procedure was
interrupted.
1. In case the injection was
interrupted ensure the entire dose
is injected. Consult your MS nurse
/ healthcare professional if the
entire dose was not received.
is injected. Consult your MS nurse
/ healthcare professional if the
entire dose was not received.
2. A malfunction was detected.
2. Hold the on-/off button down to
shut down BETACONNECT
TM
and turn it on again.
If the problem is not solved
contact your MS nurse /
healthcare professional.
If the problem is not solved
contact your MS nurse /
healthcare professional.
An orange light is shown on the
BETACONNECT
BETACONNECT
TM
during
charging.
1. The temperature is too low or
too high.
1. The BETACONNECT
TM
can be
recharged at a temperature from
10°C to 35°C / 50
10°C to 35°C / 50
– 95°F.