Global Phoenix Computer T&S Inc. FLASHII Manual De Usuario

-3-

1 Getting Started

1.1 Installing the SIM card, battery, and memory card

Remove the back cover before installing the SIM card and battery. Also, make

sure to always turn off the power before installing or replacing the SIM card and

battery.

To remove the battery

1. Make sure the device is powered off.

2. Remove the back cover.

3. The bottom of the phone has a notch. Lift the battery by the notch to remove.

To install the SIM card

The SIM card contains your phone number, service details, and phonebook/

message memory. This device supports 2G, 3G (WCDMA) SIM cards.

1. Remove the battery if installed.

2. Locate the SIM card slot, and then insert the SIM card with its gold contacts

facing down and its cut-off corner facing out the card slot.

3. Slide the SIM card completely into the slot.

Note: • The phone can support dual SIM cards. The card slot supports 3G

(WCDMA).

When 3G or 2G card inserted, you can only use 3G or 2G operation.
• Some legacy SIM cards may not function with your device. You should
consult with your service provider for a replacement SIM card. There may

be fees for this service.

To install a memory card

1. Make sure the device is turned off, then remove the back cover.

2. Locate the memory card slot on the upper part of the exposed right panel.

3. Insert the memory card into the slot with its gold contacts facing down until it

clicks into place.

Note: To remove the memory card, press in to eject it from the slot.

To install the battery