Cisco Nexus 7000 N7K-C7009= Hoja De Datos

 

 

© 2012-2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

Page 3 of 8 

● 

Independent variable-speed system and fabric fans provide efficient cooling capacity to the entire system. 

Fan-tray redundancy features help ensure reliability of the system and support for hot swapping of fan trays. 

● 

I/O modules, supervisor modules, and fabric modules are accessible from the front. Power supplies and fan 

trays are accessible from the back. 

● 

The Cisco Nexus 7000 10-Slot chassis with up to eight I/O module slots supports up to 384 x 1 and 10 

Gigabit Ethernet ports, 48 x 40 Gigabit Ethernet ports, and 16 x 100 Gigabit Ethernet ports, meeting the 

demands of large data center deployments. It has two dedicated supervisor slots to provide full redundancy. 

● 

Front-to-back airflow helps ensure that use of the Cisco Nexus 7000 10-Slot chassis addresses the 

requirement for hot-aisle and cold-aisle deployments without additional complexity. 

● 

The system uses dual system and fabric fan trays for cooling. Each fan tray is redundant and composed of 

independent variable-speed fans that automatically adjust to the ambient temperature, helping reduce 

power consumption in well-managed facilities while helping enable optimum operation of the switch. The 

system design increases cooling efficiency and provides redundancy capabilities, allowing hot swapping 

without affecting the system; if either a single fan or a complete fan tray fails, the system continues to 

operate without a significant degradation in cooling capacity. 

● 

The system supports an optional air filter to help ensure clean air flow through the system. The addition of 

the air filter satisfies Network Equipment Building Standards (NEBS) requirements. 

● 

I/O modules and supervisor modules are accessible from the front, and fabric modules, power supplies, and 

fan trays are accessible from the back. 

● 

The Cisco Nexus 7000 18-Slot chassis with up to 16 I/O module slots supports up to 768 x 1 and 10 Gigabit 

Ethernet ports, 96 x 40 Gigabit Ethernet ports, and 32 x 100 Gigabit Ethernet ports, meeting the demands of 

the largest data center deployments. It has two dedicated supervisor slots to provide full redundancy. 

● 

Side-to-side airflow increases the system density in a 25RU footprint, optimizing the use of rack space. 

The optimized density provides more than 16RU of free space in a standard 42RU rack for cable 

management and patching systems. 

● 

Independent variable-speed system and fabric fans provide efficient cooling capacity to the entire system. 

Fan-tray redundancy features help ensure reliability of the system and support for hot swapping of fan trays. 

● 

I/O modules and supervisor modules are accessible from the front, and fabric modules, power supplies, and 

fan trays are accessible from the back. 

All Cisco Nexus 7000 Series chassis have the following components: 

● 

Integrated cable management system designed to support the cabling requirements of a fully configured 

system at either or both sides of the switch, allowing outstanding flexibility. All system components can 

easily be removed with the cabling in place, providing ease of maintenance tasks with little disruption. 

● 

A series of LEDs at the top of the chassis provide a clear summary of the status of the major system 

components, alerting operators to the need to conduct further investigation. These LEDs report the power 

supply, fan, fabric, supervisor, and I/O module status.