CEI Conrad Electronic International Limited RCE-NAVIGATOR Manual De Usuario
Protect Your Model | 15
13.4 Lost locator
The Navigator 250 is equipped with a lost locator function. When triggered the
Navigator 250 emits beeps in the S.O.S. pattern.
The function is triggered by a crash or hard landing, but can also be manually triggered
by moving both control sticks to the right bottom corner and holding them in this position
for approx. 2 seconds.
In order to deactivate the lost locator, move both control sticks to the right top corner and
In order to deactivate the lost locator, move both control sticks to the right top corner and
hold them in this position for approx. 2 seconds.
Note: The beeping is also stopped as soon as the motors
are started again.
are started again.
13.5 LED – Status/Indications
Refer to
for a complete overview. Study the table
carefully and consult it whenever colour indications are important.
13.6 Electrical/electronic components
■
Make sure you do not touch the PCB boards with any wires or connectors. Be especially
careful when the flight battery is connected.
■
Electrostatic discharge can damage electronic components. Discharge yourself before
you touch them and do not leave sweat residue.
■
Keep the Navigator 250 away from magnetic sources. The Navigator 250 uses
magnetic components for navigation purpose and they may be impaired or damaged
by external magnetic forces.