CEI Conrad Electronic International Limited RCE-ONE-CAMTX Manual De Usuario

These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor,

Tower 2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong.

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the

capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also

in part, is prohibited. The operating instructions reflect the current technical specifications at time of print. We

reserve the right to change the technical or physical specifications.

V1_0813-JH

8. Affix the camera to the tape, with the camera lens (7) facing the red propellers (“facing front”).

The dip switches (5) must face up so that you are able to select the channels.

9. Make sure to guide the cable along the middle of the canopy to prevent it from getting entangled

during operation of the “RC EYE One S” (see Fig. 2).

7. oPeRatIoN
selecting the channels

The channel selection must be in line with the channel selection on your display device

(receiving device). The free field operating distance of the camera to the display device is

approximately 60 m. Obstacles such as walls or magnetic interferences can shorten the

operating distance.

Please select channel (frequency) and video output format (PAL, NTSC) as illustrated in below

diagram (see Fig. 3). Use a thin and dull object to set the switches, e.g a tooth-pick. Sharp objects

damage the switches.

CH4

( 5.790 GHz )

1 2 3 4

CH6

( 5.828 GHz )

1 2 3 4

CH7

( 5.847 GHz )

1 2 3 4

CH8

( 5.866 GHz )

1 2 3 4

CH1

( 5.733 GHz )

1 2 3 4

CH5

( 5.809 GHz )

1 2 3 4

PAL

NTSC

CH3

( 5.771 GHz )

1 2 3 4

CH2

( 5.752 GHz )

1 2 3 4

Fig. 3

Connecting to display device

Keep the operating instructions for the “RC EYE One S” and our display device ready.

The following compatible RC Logger devices can be purchased to be operated in

conjunction with the camera: RC EYE OneCam 5.8 GHz RX (89050RC) and 5.8 GHz

Video TX RX Set (20015RC). Please visit the RC Logger website at www.rclogger.com

for more information.

1. For the camera to work properly in conjunction with a suitable display device, study the

instruction manual that came with your display device carefully.

2. Set the channel. Use the dip switches (5) on the camera (see “Selecting the channels”) and for

the display device set the channel as described in its operating instructions.

3. Connect the male battery connector to the female connector (1) on the camera. Once the

control indicator light on the “RC EYE One S” lights up, the camera is supplied with power and

signal transmission is started.

4. Turn on your display device. Once pairing between camera and display device is successfully

established, image transmission can take place.

5. After use turn the camera off by disconnecting the battery.

Do not continuously operate the camera for more than 1 hour to avoid damage. After

operating for 1 hour let the camera cool down completely before using it again.

8. MaINteNaNCe, CaRe aNd RePaIR

> Disconnect the power supply to the camera before cleaning and maintenance.

> Regularily clean the camera with a dry cloth. To clean the lens you may use a cotton butt and a

suitable lens cleaning agent.

> Repairs should only be handled by a professional.

9. dIsPosal

In order to preserve, protect and improve the quality of environment, protect human

health and utilise natural resources prudently and rationally, the user should return

unserviceable product to relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately

and not as municipal waste.

Consequently you comply with your legal obligations and contribute to environmental protection!

10. fedeRal CoMMuNICatIoNs CoMMIssIoN (fCC) dIsClaIMeR

FCC ID: 2AARVRCE-ONE-CAMTX

statement according to fCC part 15.19:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

> This device may not cause harmful interference, and

> This device must accept any interference received, including interference that may cause

undesired operation.

statement according to fCC part 15.21:

Modifications not expressly approved by this company could void the user’s authority to operate

the equipment.

11. PRoduCt suPPoRt

Visit “http://www.rclogger.com/index.php/contact-us” or call +852 2559 2662 for product support.
Additionally visit our support forum at “http://rclogger.com/forum”.

12. teChNICal data

Power supply ..................................................... 12V/DC
Current consumption ......................................... max. 200 mA
Frequency .......................................................... 5.733 – 5.866 GHz
CMOS sensor .................................................... 0.3 Mega Pixels
Resolution .......................................................... 640 x 480 (VGA)
Angle of view ..................................................... 55°
Illumination ........................................................ min. 3 Lux/f1.2
Format ............................................................... PAL, NTSC
Channel ............................................................. 8 channels
Operating distance ............................................ max. 60 m (open field)
Operating conditions .......................................... -10 to +50 °C, 85 % RH (non condensing)
Storage conditions ............................................. -20 to +60 °C, 90 % RH (non condensing)
Dimensions (L x W x H) ..................................... Main camera: 43 x 9 x 9 mm

Power board: 30 x 10.5 x 7 mm

Weight ............................................................... approx. 7.5 g