6Harmonics Inc GWS-3000 Manual De Usuario
@2013 6Harmonics Inc. All Right Reserved
19
reboot
Reboot the GWS node
--help
Help command to list all above commands
7.1 help command
This command lists all available commands. If you type help during the telnet
session, you’ll see the followings:
session, you’ll see the followings:
7.2 setchan command
The “setchan” command is to set what channel the radio is going to work on.
The channel number range will vary from region to region. For example for
US, the number would be 14~51, except channel 36, 37 and 38. For
operation in the US, the module needs to querry the available channel from
FCC database and the SW will only allow the module to tune to a channel
which is part of the channel list received from the data base.
GWS Cmd >setchan 35
The channel number range will vary from region to region. For example for
US, the number would be 14~51, except channel 36, 37 and 38. For
operation in the US, the module needs to querry the available channel from
FCC database and the SW will only allow the module to tune to a channel
which is part of the channel list received from the data base.
GWS Cmd >setchan 35