6Harmonics Inc GWS-3000 Manual De Usuario
@2013 6Harmonics Inc. All Right Reserved
8
bracket is attached the module has a total thickness of 17 cm from the front of the
module to the base of the wall mount bracket.
For a basic wall mount deployment, there is a clearance of 8.5 cm between the wall
and the heat fins of the module to allow for air circulation. When the radio is in
operation, the rear surface of the module can reach a temperature of T
module to the base of the wall mount bracket.
For a basic wall mount deployment, there is a clearance of 8.5 cm between the wall
and the heat fins of the module to allow for air circulation. When the radio is in
operation, the rear surface of the module can reach a temperature of T
ambient
+ 20
o
C.
5. System Diagram
Below is a block diagram to show how the GWS radio can be used in a network.
Both the BTS and CPE can be powered via a POE Midspan. The mid-span accepts
AC power and is designed for international deployments with an input range of
100V-240V, 50-60 Hz. The mid-span then combines the Ethernet data along with a
DC bias voltage on the the Cat5e cable. The Ethernet cable from a personal
computer can be directly connected into the POE Midspan, or router as shown.
Both the BTS and CPE can be powered via a POE Midspan. The mid-span accepts
AC power and is designed for international deployments with an input range of
100V-240V, 50-60 Hz. The mid-span then combines the Ethernet data along with a
DC bias voltage on the the Cat5e cable. The Ethernet cable from a personal
computer can be directly connected into the POE Midspan, or router as shown.
BTS
CPE
iOMC
Router
Router
UHF Airwaves
POE
Midspan
Internet
AC Power
POE
Midspan
AC Power
6. Software Environment
6.1 Overview
This User’s Manual is intended to provide guidance on what the Host
Software does and how to use the Host Software to make the GWS node
function properly.
The GWS-3000 Host Software provides the following functionalities:
a) Initialize host board and GWS-3000 radio;
Software does and how to use the Host Software to make the GWS node
function properly.
The GWS-3000 Host Software provides the following functionalities:
a) Initialize host board and GWS-3000 radio;