eResearchTechnology GmbH AM3G02 Manual De Usuario
Page 25/40
Version 02.01 • Date 19JAN2017
Electrical Safety
The AM3 is powered from an internal Lithium-Ion rechargeable battery, the battery
can be charged over a direct plug-in power supply (unit).
Attention:
- Only the original power supply delivered with the AM3 must be used for charging
The AM3 is powered from an internal Lithium-Ion rechargeable battery, the battery
can be charged over a direct plug-in power supply (unit).
Attention:
- Only the original power supply delivered with the AM3 must be used for charging
the device.
- Do not perform measurements if the AM3 is connected to another device.
- Data transfer is not permitted during measurement.
- Data transfer is not permitted during measurement.
Patient Safety according to EN 60601-1
The subject has to keep a distance of at least 1,5 m from a connected modem or
notebook to avoid any contact with electrical voltage.
The subject has to keep a distance of at least 1,5 m from a connected modem or
notebook to avoid any contact with electrical voltage.
Valid for all ERT Devices
Additional equipment connected to medical electrical equipment must comply with
the respective EN or ISO standards (e.g. EN 60950 for data processing equipment).
Furthermore all configurations shall comply with the requirements for medical
electrical systems. Anybody connecting additional equipment to medical electrical
equipment configures a medical system and is therefore responsible that the system
complies with the requirements for medical electrical systems. Attention is drawn to
the fact that local laws take priority over the above mentioned requirements. If in
doubt, consult your local representative or the ERT Customer Care.
Additional equipment connected to medical electrical equipment must comply with
the respective EN or ISO standards (e.g. EN 60950 for data processing equipment).
Furthermore all configurations shall comply with the requirements for medical
electrical systems. Anybody connecting additional equipment to medical electrical
equipment configures a medical system and is therefore responsible that the system
complies with the requirements for medical electrical systems. Attention is drawn to
the fact that local laws take priority over the above mentioned requirements. If in
doubt, consult your local representative or the ERT Customer Care.
Radiated Interference
The ERT device meets the regulations according to EN 60601-1-2 regarding
interference radiated and received. It is recommended not performing
a measurement with the device directly next to other equipment or in
combination with other devices in a stacked form, as this may result in faulty
operation.
The ERT device meets the regulations according to EN 60601-1-2 regarding
interference radiated and received. It is recommended not performing
a measurement with the device directly next to other equipment or in
combination with other devices in a stacked form, as this may result in faulty
operation.