GE Inspection Technologies LP 7260H Manual De Usuario

Images are distorted or 

blurred within normal 

range.

•   Optical tip is not threaded 

onto the camera head 

securely.

•   The optical surfaces are dirty.

•   No tip optic or head guard is 

installed on camera tip.

Reinstall the optical tip. See 

•   Clean the optical tip and the camera head. See 

 

and 

” 

•   The Visual iQ 6.1mm diameter probes require the use of the 6.1mm headguard supplied. This headguard is unique to the  

Visual iQ 6.1mm in that it contains an aperture unlike previous product generations. 

•  Remove the tip optic.

•  Try a different tip optic.

Image quality is otherwise 

poor.

Various

•  If available connect a different probe to handset.

•   If image quality issue is associated with a specific probe contact GE Inspection Technologies to obtain a return material 

authorization (RMA).

No image appears in the 

display.

(Hard Keys are lit)

Various

•   Verify that the probe is properly seated and latched. See 

•  Reboot system.

•  If available connect a different probe to handset.

•   If image quality issue is associated with a specific probe contact GE Inspection Technologies to obtain a return material 

authorization (RMA)

•   Point the probe tip toward a bright light and see if image appears. If image appears, the problem is associated with lamp 

operation. If still no image, contact GE Inspection Technologies to obtain a return material authorization (RMA).

•  If a Displayport cable was purchased connect to a Displayport capable monitor. Determine whether an image appears on it. 

Dark video image

Various

•   Clean the optical tip and the camera head. See 

 and 

•  Verify the LCD Brightness is properly adjusted for the ambient condition.

•  Check the insertion tube and bending section for severe kinks or dents.

•  No LED operation

Frozen image “jitters” or is 

blurred.

•   Probe tip was moving when 

image was captured.

•  Unfreeze then refreeze the image, keeping probe tip steady.