Shenzhen Fostar Electronic Co. Ltd FC2403P-2405P Manual De Usuario
59
59
Alarm Pictures Save To:
FTP or SD Card. If you have done FTP and Alarm settings, when alarming, the
camera will snap pictures to the FTP automatically. If select SD Card as the save path, make sure the camera
has inserted in the SD card.
has inserted in the SD card.
Enable timing to capture
To enable capture interval, follow the steps below:
To enable capture interval, follow the steps below:
1
Select Enable timing to capture
2 Capture interval:
The interval time between two captures.
3 Select the capture time
z
Capture anytime
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will capture.
detection area at anytime, the camera will capture.
z
Specify an capture schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all
column of TUE turns to red, that means during Tuesday whole day, the camera will capture.
column of TUE turns to red, that means during Tuesday whole day, the camera will capture.
z
Press the left mouse and drag it on the time boxes, you can select the serial area,
4
Click Save button to take effect.
4.4.5 IR LED Schedule
On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the
Schedule
on the Live Video window, at these schedule time, the IR LED lights will be turned off.
Figure 4.52
4.5 Alarm
IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or
upload images to FTP.
upload images to FTP.