NEOCORTEC A/S NC2400C1 Manual De Usuario

- 15 of 16 –

neo.cortec

9 Examples

9.1 Acknowledged Payload data transmission through the network

In the following example, payload data is send from a sensor node to a PC which is

attached to another node in the NEOCORTEC network.

Figure 3 - Network example

In the example, the Originator node has the NEOCORTEC ID 0x00 20 and the Receiving

node has the NEOCORTEC ID 0x00 2A. Port 0x00 is used throughout the example.

This example only uses the Application API.
When the uController has a sensor measurement that it wants to send to the PC, this is

what happens:

1) uController sends a frame to the Originator node. The frame instructs the Originator
node to send the sensor data to the Receiving node. The sensor data is 1 byte and has

the value 0x23:

Section

Code

Length UART Payload

Content 0x03

0x04

0x002A0023