Contec Medical Systems Co. Ltd. CONTEC08A-BT Manual De Usuario
11
Chapter7 Set Date and Time
The Electronic Sphygmomanometer stores 100 groups of measurement results at most. If the date
and time are set correctly, the date and time when measuring will be correct in the memory,
otherwise it may not be correct.
and time are set correctly, the date and time when measuring will be correct in the memory,
otherwise it may not be correct.
Note
Correctly use data upload function:
1. First, make sure the time is right, there are three modes of time setting:
(1)When using the Sphygmomanometer for the first time or after the Sphygmomanometer
has been placed without power supply for a certain time(more than 5 minutes), after power on,
there is a prompt of time error on the main interface, set date and time with 【UP】, 【DOWN】
and 【ENTER】 button.
(2)Press 【MENU】 button on the main interface to enter system menu, then enter
【
SYSTEM TIME】 item, the current time will be displayed on the screen. Set date and time
with 【UP】, 【DOWN】 and 【ENTER】 button
It is necessary to set date and time after power on.
The Electronic Sphygmomanometer can automatically stores
measurement results with date and time
If dry batteries power exhausts or removed, the time to stop.
At the moment, please reset date and time.
Short-term(less than 5 minutes) power cut does not affect time.(such as
replacing batteries)