Contec Medical Systems Co. Ltd. CONTEC08A-BT Manual De Usuario

 

1

Alarms are classified into two categories: technical alarm and physiological alarm. 

9.1 Physiological Alarm 

User can press  【MENU】  button to enter system menu, select  【ALARM SETUP】 option to 

enter its interface, and then set alarm on-off and the high and low alarm limits, during setting 

alarm parameter, if the high limit lower than the low limit, the device will display a prompt, users 

allow or reset it according to the actual situation. When the measurement result is higher than the 

high limit or lower than the low limit, the physiological alarm will occur. 

   

Under physiological alarm, press any button to cancel this alarm, and it does not affect the next 

alarm; the alarm can be closed permanently with alarm switch of the alarm setup menu until the 

alarm switch be opened again. 

9.2 Technical Alarm 

When the battery is low and the alarm is on, the device will sound an alarm. This alarm can 

not be cancelled, unless you turn off the alarm switch or replace the power supply.