Beijing kaiyuantianhui technology co. ltd ET-004 Manual De Usuario
Wireless mouse user manual
Ø Battery installation:
1、
use two AAA1.5 V batteries.
2、
1.Open the battery cover at the bottom of the mouse
3、
2. Insert two AAA1.5 V batteries, (please pay attention to is the cathode of the battery to
insert in the direction across the electrodes of labeled correctly).
4、
3. Cover the mouse battery cover
Ø hardware installation:
1、
the receiver directly or via USB extension cord from the USB interface of a computer..
5、
move the mouse can be used, such as can't use please see ID code and mouse failure
lifting method.
Ø
ID code:
6、
move the mouse close to the receiver;
7、
first press the mouse button to the code on the "Connect", then click on the receiver on
the code key "Connect", move the mouse, then automatically Connect with computer,
please do not reverse this process.
8、
the setup process must be completed in 8 seconds, if the timeout please repeat the above
steps.
Ø
save electricity:
mouse over 5 minutes when not in use, the mouse will automatically
enter power saving mode, which is the mouse will not electricity, photosensitive element
does not shine, when you want to use, click on the left or right to use.
1.
Using the environment:
in order to prevent environmental disturbance
caused by the mouse can't normal use, please pay attention to the following aspects:
1、
please don't put the mouse or receiver in a metal cabinet or on the table, the metal will
produce the RF interference, thereby weakening the RF transmission and shortening the
distance between the mouse.
2、
in order to prevent interference, please keep the mouse and other RF electronic products
in the distance of 1.5 meters.
3、
when placed on a mirror, glass or other reflective surface, can cause the mouse light
sensors don't work properly.
2. Faults and remove meth:
1、 The mouse is not working
.confirm whether battery, such as no electricity,