Security People Inc. dba Digilock 5GNMTRNLTR Manual De Usuario
Touch RFID
Bolt Mechanism
Shared Use Functionality
Product Guide
Phone: 707 766 6000
www.digilock.com | sales@digilock.com
050917
PG-NMTR-AT-DEN
PG-NMTR-AT-DEN
5
Battery Replacement
(shown with cable rear unit)
Support
It is not necessary to uninstall the lock from the door.
Remove the screws and the cover plate.
Pull the battery pack from the rear housing.
Replace with four premium alkaline
AA batteries.
Replace with four premium alkaline
AA batteries.
Place the battery pack back into the rear
housing and screw cover plate in place.
housing and screw cover plate in place.
Error Condition Indicators
10 rapid beeps:
The lock is binding which means that either door alignment or stored items are preventing the lock from operating. Press on the door while
operating the lock. If error condition persists, contact Digilock support for assistance.
operating the lock. If error condition persists, contact Digilock support for assistance.
2 s ets of three beeps:
The batteries are low. Replace the batteries.
Does not Unlock with the User Credential (User Key or RFID)
The lock does not recognize the user credential. For immediate access, operate with a valid manager credential.
Does not Operate with a Manager Credential (Manager Key or RFID)
The lock does not recognize the manager credential. Follow instructions to Add Manager Credentials to program the manager credential to
the lock. For immediate access, operate with another valid manager credential or with the Programming Key.
the lock. For immediate access, operate with another valid manager credential or with the Programming Key.
Does not Operate with the Programming Key
The lock does not recognize the Programming Key. If the Programming Key has been replaced, operate with the Replacement
Programming Key. Contact Digilock support for additional assistance.
Programming Key. Contact Digilock support for additional assistance.
No Audible Feedback when
` is Pressed
▪
The batteries may need to be replaced. For immediate access, operate with a valid Manager Key.
▪
The front unit may not be properly connected to the rear unit. Remove the lock from the door and check the connection.
1
2
3