LGS Caribbean Inc. INDIPADRL14 Manual De Usuario
25
1. Tap the
Task Manager Application icon.
2. Tap Install to display all applications and folders.
3. Find and tap on an application you want to install → tap Install.
28 WI-FI
Tap
Settings → Wi-Fi, enter into Wi-Fi settings.
1.
Slide the Wi-Fi switch to turn on Wi-Fi.
2.
All the AP in the vicinity will be listed, click to select the name you want to connect to
AP;
3.
If the AP is connected successful before, the AP information will be saved in the pop-up
window, select "Connect" starts to connect, choose "forget" to remove AP information;
4.
If the AP is not encrypted, in the pop-up window, select "Connect" Start Connection;
5.
If the AP is encrypted, enter the password in the pop-up window, and click "Connect"
Start Connection;
6.
When internet connections are successful, the wireless connection icon in the bottom
status bar appears.
29 PPPoE SETTINGS
Before using this feature, connect the USB network card via the USB host transfer cable
access to device.
1. Tap Settings → PPPoE settings .
2. Input name and password then click connect to access the broadband network.
30 ETHERNET
Before using this feature, connect the USB network card via the USB host transfer cable
access to device. When the USB network cable plugged into the USB network card, you will see
the bottom of status bar ETH symbol
appears
1. Tap Settings → Ethernet.
2. The device can automatically obtain IP address to connect to the network. You can also
choose to manually set the IP address to get connected.
31 SETTINGS