Building 36 Technologies LLC B36T10RA Manual De Usuario

2   |   Intelligent Thermostat User Guide

Intelligent Thermostat User Guide   |   3

Thermostat

Backplate

Trim Plate (Optional)

• Before installing or servicing

your thermostat, turn off 
power to the system at 
circuit breaker.

• Leave power off until

finished installing or 
servicing.

• Shorting the electric 

terminals at the control 
on the heating or cooling 
system may damage the 
thermostat. Do not test the 
system this way.

• You must follow all local 

codes and ordinances for 
wiring your system.

• This thermostat should only 

be powered by 4AA alkaline 
batteries or a Listed class 

2 power supply at 24 VAC 

(C-Wire or wall transformer).

• An amperage higher than 1 

amp to each thermostat 
relay load may cause 
damage to the thermostat.

• To avoid electrical shock 

and to prevent damage 
to the HVAC system and 
thermostat, disconnect 
the power supply before 
installing or servicing. It is 
recommended this be done 
at the circuit breaker. 

Drywall Screws (3)

AA Batteries (4)

Drywall Anchors (3)

• Needlenose Pliers

• Phillips Screwdriver

• Power Drill

• Pencil