Building 36 Technologies LLC B36T10RA Manual De Usuario
2 | Intelligent Thermostat User Guide
Intelligent Thermostat User Guide | 3
Thermostat
Backplate
Trim Plate (Optional)
• Before installing or servicing
your thermostat, turn off
power to the system at
circuit breaker.
power to the system at
circuit breaker.
• Leave power off until
finished installing or
servicing.
servicing.
• Shorting the electric
terminals at the control
on the heating or cooling
system may damage the
thermostat. Do not test the
system this way.
on the heating or cooling
system may damage the
thermostat. Do not test the
system this way.
• You must follow all local
codes and ordinances for
wiring your system.
wiring your system.
• This thermostat should only
be powered by 4AA alkaline
batteries or a Listed class
batteries or a Listed class
2 power supply at 24 VAC
(C-Wire or wall transformer).
• An amperage higher than 1
amp to each thermostat
relay load may cause
damage to the thermostat.
relay load may cause
damage to the thermostat.
• To avoid electrical shock
and to prevent damage
to the HVAC system and
thermostat, disconnect
the power supply before
installing or servicing. It is
recommended this be done
at the circuit breaker.
to the HVAC system and
thermostat, disconnect
the power supply before
installing or servicing. It is
recommended this be done
at the circuit breaker.
Drywall Screws (3)
AA Batteries (4)
Drywall Anchors (3)
• Needlenose Pliers
• Phillips Screwdriver
• Power Drill
• Pencil
Contents:
Recommended Tools: