Invenco Group Ltd G7UPC Manual De Usuario
G7OPT Integrator Manual, DWI-00175 S1 R15
5.2 G7UPC Installation Guide
5.2.1 Introduction
The G7UPC (Unified PIN pad / Card Reader) is a PCI-compliant device for the secure reading of cards
and entry of numeric data. It is intended to operate in conjunction with the G7SDC (Secure Display
Controller).
and entry of numeric data. It is intended to operate in conjunction with the G7SDC (Secure Display
Controller).
The UPC is a highly secure device. However, some of its security features are reliant on the method of
installation; therefore please pay careful attention to the requirements outlined in this document.
installation; therefore please pay careful attention to the requirements outlined in this document.
To cater for the requirements of system integrators, Invenco supplies the UPC in a rigid, plastic housing
designed for the purpose. This configuration is the focus of these installation instructions.
designed for the purpose. This configuration is the focus of these installation instructions.
The removal-tamper sensors on the UPC’s keypad fascia have been armed already, in the process of
fitting the module into the housing; they will be activated if it is removed. Additional removal-tamper
connections are supplied for use by integrators:
fitting the module into the housing; they will be activated if it is removed. Additional removal-tamper
connections are supplied for use by integrators:
• two clusters, of four tamper pills each, at the lower corners on the back of the plastic housing.
(See §5 Housing Removal-tampers.) These will be armed when the housing is installed (from the
front) into the integrator’s cabinet.
front) into the integrator’s cabinet.
• two external, analogue current-loops. One of these is used with a flexible printed circuit to protect
against removal of the UPC from its plastic housing. The other is available for connection to a
sensor supplied by the integrator.
sensor supplied by the integrator.
Chapter 5. Appendices
29