Bombardier Transportation JGA29001-6 Manual De Usuario
Doc.Id:
Status:
RELEASED
Version:
1.0
© 2014, Bombardier Inc. or its subsidiaries.
Confidential and proprietary.
Filename: JGA29001-6UserMan.docx
Page 8 of 15
1DOC-1001388
Attenuation free area
2.4.1.2 In points
Location of transponders in points should be avoided. Metallic parts in the point
may cause disturbances to the transmission. Mechanised track maintenance
equipment and e.g. snow removal equipment can damage transponders. It is also
difficult to fulfil the requirements regarding the maximum deviation of the
lateral position. See chapter 2.5.2.2
may cause disturbances to the transmission. Mechanised track maintenance
equipment and e.g. snow removal equipment can damage transponders. It is also
difficult to fulfil the requirements regarding the maximum deviation of the
lateral position. See chapter 2.5.2.2
.
2.4.1.3 At rail joints
Strain and movement in the track are greatest at the joints. Here transponders
can be damaged by mechanical strain. It is recommended to locate transponders
not closer than 1.1 m from the centre of the transponder to a rail joint.
can be damaged by mechanical strain. It is recommended to locate transponders
not closer than 1.1 m from the centre of the transponder to a rail joint.
>1,1m
RAIL JOINT
200
200
400
536
550
550
2 0
0