Bombardier Transportation JGA29001-6 Manual De Usuario
Doc.Id:
Status:
RELEASED
Version:
1.0
© 2014, Bombardier Inc. or its subsidiaries.
Confidential and proprietary.
Filename: JGA29001-6UserMan.docx
Page 15 of 15
1DOC-1001388
18. Perform a function test according to the "Approval test instruction"
documentation.
2.5.5 Example of attachment to concrete crossties
There are a lot of different methods for attaching a transponder to a concrete
crosstie, and there is up to local requirements which one to use:
crosstie, and there is up to local requirements which one to use:
One method is to use bolts or insert fastened directly in the crossties for
mounting of the transponder. In this case the manufacturer of the crosstie has to
approve the fastening method. The mounting procedure is similar as for
attachment in wooden crossties.
mounting of the transponder. In this case the manufacturer of the crosstie has to
approve the fastening method. The mounting procedure is similar as for
attachment in wooden crossties.
It is also possible to use some kind of mounting brackets. There are a lot of
different models of concrete crossties, so no detailed instruction will be stated in
this document. It has to be defined for each application. Contact Bombardier for
advice and approval.
different models of concrete crossties, so no detailed instruction will be stated in
this document. It has to be defined for each application. Contact Bombardier for
advice and approval.
3 Test of installation
Before the installation can be approved for traffic, the inspection and
test procedures must be performed.
test procedures must be performed.