Condeco Ltd TIX6-GW Manual De Usuario
Page 5 of 11
Condeco Sense
Network Configuration
Once logged in to the UI expand Others on the left to open up the available options as
highlighted below. Navigate to Condeco Network Settings
highlighted below. Navigate to Condeco Network Settings
Condeco Network Settings
Under network settings, the option to set a connection via LAN, Wifi and 3G are available.
The purpose of this guide is to set up a 3G connection. Once the 3G sim card has been
inserted, the options will need to be configured in the following order for them to update
successfully.
The purpose of this guide is to set up a 3G connection. Once the 3G sim card has been
inserted, the options will need to be configured in the following order for them to update
successfully.
1) Under LAN set your DNS1 entry to 8.8.8.8 and then Update.
2) At the end of the page, the default routing preference will be set to unknown.
2) At the end of the page, the default routing preference will be set to unknown.
Change this order to: GSM-WIRED-WIFI and then Update.
3) Go online and find the APN details for the 3G network provider you are using.
Change this to the correct details and select Update.
4) After you update each section, you will be promt to Restart to use the new
settings. Navigate to Condeco System Settings on the left.
5) Navigate to the end of the page. You will have Reboot and Shutdown available
here. Select Reboot for the changes to take affect.
6) After the reboot, navigate back to Condeco Network Settings and ensure the
settings saved successfully.