SES-imagotag GmbH E00001 Manual De Usuario
Only persons with the following knowledge are allowed to replace the battery:
Battery
Electronic assemblies like circuit board
Compliance of the instructions
Risk of explosion through incorrect battery replacement.
Use battery pack exclusive provided from the company imagotag GmbH.
Keep attention that your hands are dry before you start with the replacement.
Don’t use sharps to open the label.
Don’t use your fingernails to open the label.
Don’t touch the circuit board of the open label.
1. Press both snap-in-mounts of the battery cover (backside of the label) until the battery cover
detaches. Afterwards take the battery cover from the label.
2. Pull the white plug out of the socket, don’t pull on the cable.
3. Take out the battery pack.
4. Put in the new battery pack.
5. Push the white plug in the socket.
6. Put the battery cover on the label casing.
3. Take out the battery pack.
4. Put in the new battery pack.
5. Push the white plug in the socket.
6. Put the battery cover on the label casing.