Duravit AG 596000098001 Manual De Usuario
25
can also soak a cloth in the cleaner then place it on the soiled area.
> Rinse with clean warm water to remove all traces of the cleaner (when detergent evaporates, the fumes
may seep into the top unit and cause damage to the product).
> Dry the surface.
> Rinse with clean warm water to remove all traces of the cleaner (when detergent evaporates, the fumes
may seep into the top unit and cause damage to the product).
> Dry the surface.
8.3 Stainless steel covers
Only use soft damp cloth to wipe the stainless steel covers, otherwise it might scratch the covers. When
using cleaning sponges ensure that the scrubbing side does not contain metal particles. Do not use metal
items to remove scaling.
> Clean scaling from stainless steel parts immediately.
> Clean stainless steel with detergents that DO NOT contain either hydrochloric acid or chloride.
> Rinse off deposited materials with soft damp cloth and remove stubborn chloride deposits manually.
using cleaning sponges ensure that the scrubbing side does not contain metal particles. Do not use metal
items to remove scaling.
> Clean scaling from stainless steel parts immediately.
> Clean stainless steel with detergents that DO NOT contain either hydrochloric acid or chloride.
> Rinse off deposited materials with soft damp cloth and remove stubborn chloride deposits manually.
8.4 Remote control
> Clean the remote control and bracket with a soft, damp cloth.
8.5 Prolonged disuse
If you do not use SensoWash® for two weeks or above, please drain the water inside the product.
> Disconnect the water supply.
> Disconnect the water supply.
> Press the „Full flush“ button
on the remote control.
> Switch off the power supply.
> Remove the batteries from the remote control.
> Remove the batteries from the remote control.
Skin irritation
> Use the self-cleaning of the spray wand to re-circulated the water.
Note!
Product damage due to freezing water in winters
> Drain the water inside the product.
> Use the self-cleaning of the spray wand to re-circulated the water.
Note!
Product damage due to freezing water in winters
> Drain the water inside the product.
8.6
Power or water supply failure
The product will not flush properly if there is power or water failure. In such a situation, please pour a big
bucket of water (8L) into the center of the toilet bowl to induce flushing. Be careful not to splash water from
the toilet bowl.
If the water level is too low in the toilet bowl after the bucket is poured, add more water. The water prevents
odors from coming out of the sewer pipes through the toilet bowl drain.