Dongguan Fenglin Industry Co. Ltd. FLFS Manual De Usuario
insole LED turn orange-light and last 3 seconds, the insole turn into the mid-end
model.
4. Press the L button on the remote control, remote control LED flash once, then the
insole LED turn green-light and last 3 seconds, the insole turn into the low-end
model.
5. Press the ON button , remote control LED flash once, the LED off , insole stop
working.
III
. If lost the remote control, please press the switch next to the charging port.
1. Press the switch last three seconds to start the insole, insoles LED on red light and
last three seconds, insole work in the high-end model.
2. When the insole worked in high-end model, press the switch, insole LED on orange
light and last three seconds , insole turn into the mid-end model.
3. When the insole worked in mid-end model, press the switch, insole LED on green
light and last three seconds, insole turn into low-end model.
4. Press the switch again then the insole will work in high-end model, repeated cycles.
5. Press the switch last more than three seconds , LED light flash twice ,insole stop
working.
Heating parameters:
High-end: 55℃±2℃, last about 3-4 hours.
Mid-end: 50 ℃±2℃, last about 4-5 hours.
Low-end: 45 ℃±2℃, last about 6-7 hours.
NOTE :
Insoles are suggested to be used between -20 °C ~ 60 °C range.
Extreme temperature will influence the performance of lithium battery.
Battery capacity lower rapidly in extreme cold weather!