CLEVER BRIGHT INTERNATIONAL LTD. CB-M001 Manual De Usuario
PARTY PAL BLUETOOTH
SPEAKER
1. Power ON/OFF
2. Speaker
3. Previous / Volume -
4. Microphone
5. Next / Volume +
6. Charging port
7. LED indicator
8. Suction Cup
9. USB charging cable
2. Speaker
3. Previous / Volume -
4. Microphone
5. Next / Volume +
6. Charging port
7. LED indicator
8. Suction Cup
9. USB charging cable
FEATURES
Maximum Output: 3W
S/N ratio: >65db
Frequency range: 100Hz-20 KHz
Battery voltage: 3.7V DC
Distortion THD: <1%
Nominal voltage: 3.7V DC
Battery: Built –in lithium battery, 3V DC/200mAh
Charge Voltage/Current: 5V +0.25V/1A
Working time : 2-3 hours (vary with volume)
Product size: 60*60*60mm
S/N ratio: >65db
Frequency range: 100Hz-20 KHz
Battery voltage: 3.7V DC
Distortion THD: <1%
Nominal voltage: 3.7V DC
Battery: Built –in lithium battery, 3V DC/200mAh
Charge Voltage/Current: 5V +0.25V/1A
Working time : 2-3 hours (vary with volume)
Product size: 60*60*60mm
BLUETOOTH PAIRING
1. Press Power button to turn ON the speaker until there
is a voice notice and LED flashes blue. It is ready to pair.
2. Place the speaker and Bluetooth device (phone or
music device) so that they are no further than 1 meter
apart.
3. Activate the Bluetooth function on your Bluetooth
device (phone or music device). Please refer to the
manufacturer’s instruction manual to enable Bluetooth on
your device.
4. Select the speaker “ Party Pal Speaker” from the list of
available Bluetooth devices.
is a voice notice and LED flashes blue. It is ready to pair.
2. Place the speaker and Bluetooth device (phone or
music device) so that they are no further than 1 meter
apart.
3. Activate the Bluetooth function on your Bluetooth
device (phone or music device). Please refer to the
manufacturer’s instruction manual to enable Bluetooth on
your device.
4. Select the speaker “ Party Pal Speaker” from the list of
available Bluetooth devices.
5. If required, enter the password “0000”.
6. Once paired successfully, you will hear the
confirmation of indication tone .
7. If pairing is unsuccessful, turn off the speaker first and
then re-pair following the above steps.
8 Once you have paired the speaker with a device, the
speaker will remember this device and will pair
automatically when the device’s Bluetooth is activated
and in range.
9. The speaker will attempt to automatically connect to
the last device it was paired with when turned ON. If you
want to pair it with a new device, please follow the steps
outlined above.
6. Once paired successfully, you will hear the
confirmation of indication tone .
7. If pairing is unsuccessful, turn off the speaker first and
then re-pair following the above steps.
8 Once you have paired the speaker with a device, the
speaker will remember this device and will pair
automatically when the device’s Bluetooth is activated
and in range.
9. The speaker will attempt to automatically connect to
the last device it was paired with when turned ON. If you
want to pair it with a new device, please follow the steps
outlined above.
MULTI FUNCTION BUTTONS
Power ON/OFF: Turn ON/OFF speaker.
In Bluetooth mode, press this
button to : Play/Pause/Answer/End/Cancel Dial.
In Bluetooth mode, press this
button to : Play/Pause/Answer/End/Cancel Dial.
Previous / Volume -: Press this button to skip to the
previous song. Hold this button down for longer to
decrase the volume.
previous song. Hold this button down for longer to
decrase the volume.
Next / Volume+: Press this button to skip to the next
song. Hold this button down for longer to increase the
volume.
song. Hold this button down for longer to increase the
volume.
CHARGING
The Speaker includes a built in rechargeable battery. It
is recommended to charge the battery fully prior to
first use.
Connect the USB cable to a computer or other USB
charging port and the Mini USB plug into the charging
port of the speaker.
is recommended to charge the battery fully prior to
first use.
Connect the USB cable to a computer or other USB
charging port and the Mini USB plug into the charging
port of the speaker.
IMPORTANT NOTES
* This product is not a toys.
* Do not drop or damage the speaker.
* Do not use in humid or extreme teperatures.
* Do not place the speaker near an open flame.
* Do not block the sound of the speaker while it is in
use.
* Do not use the unit if it has been dropped or damaged
in any way.
* If damaged, do not attempt to repair or disassemble
the speaker.
* Do not drop or damage the speaker.
* Do not use in humid or extreme teperatures.
* Do not place the speaker near an open flame.
* Do not block the sound of the speaker while it is in
use.
* Do not use the unit if it has been dropped or damaged
in any way.
* If damaged, do not attempt to repair or disassemble
the speaker.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference
will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for help.
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference
will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for help.
FCC STATEMENT
1.
1.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired operation.
2.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.