ERON ELEKTRONIK BILGISAYAR YAZILIM ve SAN.TIC.LTD.STI MS037 Manual De Usuario

Please check your firmware and app versions to verify the reference of this document. 

The HDR mode is used to take pictures with different exposures. You can use image processing software to 
combine these pictures and create an HDR image. This mode requires you to set three different parameters. 
These are Center, EV(+-), and Frame. The center value determines the initial value for the exposure. The 
second parameter is the EV (Exposure Value). This parameter determines how many exposure steps will be 
added up and down from the center value. The third parameter is Frame and this one determines how many 
pictures to be taken. 
 

Using Press & hold mode you can keep the shutter open as long as you want. The shutter will open when you 
press the circle and it will close whenever you release it. 
 

Press & Lock mode will open the shutter with a tap on the screen. The shutter will remain open until you tap 
the screen again. 
 

In this mode you can keep the shutter open for a certain period of time. You can specify the time period in 
seconds. You can go up to 1 hour. 
 

The Mobile Dongle mode enables you to trigger your camera without being it connected to MIOPS. In this 
mode your camera has to be connected to the mobile dongle and the mobile dongle will be connected to the 
earpod output of your smart phone. Set the volume of your smart phone to the highest level. You can put 
MIOPS far away from your camera. When MIOPS has to trigger your camera, it will send a signal to your 
smartphone and your smartphone will trigger your camera using the mobile dongle. In this mode, MIOPS must 
be able to send Bluetooth signal to your smartphone. Also make sure that your smart phone is not auto-locked. 
The phone will not be able to communicate with MIOPS if it is locked.   
For the reference cable connection for the Mobile Dongle Mode, please see the picture below.