Prentke Romich Company ACN1400 Manual De Usuario
Setting Up Infrared (IR) for Remote Controls
IR capability is enabled automatically with the Accent. The IR area of your device is on the back
of the case on each side of the headphone jack, near the top. When you are facing the front of
the device, the IR learning receiver is on the top left and the IR transmitter is on the top right
of the IR area.
of the case on each side of the headphone jack, near the top. When you are facing the front of
the device, the IR learning receiver is on the top left and the IR transmitter is on the top right
of the IR area.
You can teach infrared signals for almost any appliance you own that has a remote control. If you
want to teach a remote control signal to your device, point your remote control at the IR area.
want to teach a remote control signal to your device, point your remote control at the IR area.
If you want to send an IR signal from your device, make sure the IR area is facing in the general
direction of the appliance you want to send the signal to.
direction of the appliance you want to send the signal to.
Use the IR Setup Menu in the NuVoice Toolbox to teach remote signals to your Accent. The
following IR functions can be performed in NuVoice by using IR Setup Menu in the Toolbox:
following IR functions can be performed in NuVoice by using IR Setup Menu in the Toolbox:
x Add, modify, delete, or rename a device/appliance
x Add, change, delete, and test IR functions
Adding a Device
Several devices are already set up in the Accent. You only need to teach the signals to your
device. To add additional devices, select Add a Device and follow the instructions on the display.
device. To add additional devices, select Add a Device and follow the instructions on the display.
Modifying a Device
1. Use the Up/Down arrows to select the appropriate device. When the appropriate device is
found, tap the button for the desired function and follow the instructions on the display.
2. Select Modify Selected Device.
3. Select the function to be changed and follow the instructions on the display.
4. When instructed, point the appliance’s remote control at the top of the Accent and press
the appropriate function button on the remote (for example, the power button).
 When teaching the device a new signal or re-learning a signal, make sure the remote is
pointed directly at the IR learning receiver on the left side of the headphone jack.
pointed directly at the IR learning receiver on the left side of the headphone jack.
5. The Accent will beep when it receives the signal.
6. Select Test Signal to confirm that the signal functions properly.
 The Re-Learn All Signals option allows each signal for an appliance to be re-learned
without re-entering the menu each time.
without re-entering the menu each time.
Accent 1400 Hardware Manual
Page 1
6