CELL TECH ELECTRONICS INC. CICLON Manual De Usuario
User Manual
3
4. Bluetooth
Turn on Bluetooth or set the phone can be detected、Press home>menu, the touch settings.、Touch wireless and internet, then
choose Bluetooth box to open the Bluetooth function. After started, the status box will show this icon (
). Touch “scan for devices”
the it starts to scan for all devices within range.Touch Bluetooth settings, all the devices founded will display in the list under the icon.
（select the box “can be detected”, set it to be detected, the other Bluetooth devices will be able to find the phone.）important：the
maximum detecting time of the phone is 2 minutes.Pairing and connection of Bluetooth headset1) Press home>menu, then touch
settings.2)Touch wireless and internet>Bluetooth settings, then select Bluetooth box, then your phone will scan for the Bluetooth
devices within range ,and show the founded devices in the list under the icon.Tips：If the list can’t find your equipment, touch
scanning equipment to re-scan it.Make sure that the devices wanted are under the detected mode.Touch headset in the equipment
list to finish the connection.Notices：generally Bluetooth devices need password to be paired, often use「0000」as the default
password.4)The pairing and connecting status will show under the headset in the Bluetooth devices list. When the headset
connected to your phone, the status box will show this icon（
）means connected. Then you can use the headset to make or
receive callings..Cut the connection to the Bluetooth;Presshome>menu>settings>wireless;and;internet>Bluetoth settings.In the list
of Bluetooth equipment, touch or tap and hold the connected hand-free headset.Press and select “cancel the pairing”.Bluetooth
proximity sensor
After pairing the two device,you can test out the signal is strong or weak by the Bluetooth proximity sensor device
5. Mail
Load Email、Enter the correct address and password >settings correct port and POP server, check the server settings automatically.Set the
correct SMTP server, check the mails server’s sending and receiving settings, then enter the specified account name and displayed name on the
outing e-mail.> Finish.Create and send mails、When creating mails, select mails > create mails. Enter the address(recipient)、theme and
contents. Press MENU you could ‘append’、‘Add Cc/Bcc’, select send or discarded or save as draft.
correct SMTP server, check the mails server’s sending and receiving settings, then enter the specified account name and displayed name on the
outing e-mail.> Finish.Create and send mails、When creating mails, select mails > create mails. Enter the address(recipient)、theme and
contents. Press MENU you could ‘append’、‘Add Cc/Bcc’, select send or discarded or save as draft.