Ulterius Technologies LLC FDN40 Manual De Usuario

Descargar
Página de 388
 
CHAPTER 17: DHCP RELAY AGENT 
`FDN40ConfigUM/20160505 
362 
© Ulterius Technologies, LLC 2016. Confidential & Proprietary. 
 
 
2.  View the debug trace level.  
UltOs# show ip dhcp relay information  
Dhcp Relay                  : Enabled 
Dhcp Relay Servers only     : Enabled 
DHCP server 1               : 20.0.0.1 
Dhcp Relay RAI option       : Enabled 
Default Circuit Id information : router-index 
Debug Level                 : 0xff 
No of Packets inserted RAI option               : 0 
No of Packets inserted circuit ID suboption     : 0 
No of Packets inserted remote ID suboption      : 0 
No of Packets inserted subnet mask suboption    : 0 
No of Packets dropped                           : 0 
No of Packets which did not inserted RAI option : 0 
 Interface  vlan1 
Circuit ID : 340 
Remote  ID : hello 
16.10 
Acquiring IP from a Server Residing Outside the 
Client Network 
Refer Figure 16-1 for the Topology Setup.  
Connect Port 1 of FDN40
-
1 to Port 1 of FDN40
-
2 and connect Port 2 of 
FDN40
-
2 to Port 1 of DHCP client.  
1.  Create vlan2 in FDN40
-
1 with Port 1 as member port. Then, add a route 
to 30.0.0.0 network though 20.0.0.2 (FDN40
-
2).  
UltOs# configure terminal  
UltOs(config)# vlan  
UltOs(config-vlan)# ports lan 0/1 untagged lan 0/1 
UltOs(config-vlan)# exit  
UltOs(config)# interface vlan  
UltOs(config-if)# shutdown  
UltOs(config-if)# ip address 20.0.0.1 255.0.0.0  
UltOs(config-if)# no shutdown  
UltOs(config-vlan)# exit  
UltOs(config)# interface lan 0/1  
UltOs(config-if)# switchport pvid