Ulterius Technologies LLC FDN40 Manual De Usuario
CHAPTER 4: RIP
Configuration User Manual
76
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
UltOs(config-if)# exit
4.3.3
Configuration in FDN40-3
Refer Figure 4-2 for Setup.
Prerequisite: Configuration of VLAN Interfaces (vlan1 and vlan4)
UltOs# configure terminal
UltOs(config)# interface vlan 1
UltOs(config-if)# shutdown
UltOs(config-if)# ip address 10.0.0.3 255.255.0.0
UltOs(config-if)# no shutdown
UltOs(config-if)# exit
UltOs(config)# vlan 1
UltOs(config-vlan)# ports lan 0/1 untagged lan 0/1
UltOs(config-vlan)# exit
UltOs(config)# interface vlan 4
UltOs(config-if)# shutdown
UltOs(config-if)# ip address 40.2.2.2 255.255.255.0
UltOs(config-if)# no shutdown
UltOs(config-if)# exit
UltOs(config)# vlan 4
UltOs(config-vlan)# ports lan 0/4 untagged lan 0/4
UltOs(config-vlan)# exit
UltOs(config)# interface lan 0/4
UltOs(config-if)# switchport pvid 4
UltOs(config-if)# no shutdown
UltOs(config-if)# exit
4.4 Default Configurations
None
4.5 RIP Configurations
4.5.1
Enabling and Disabling RIP
4.5.1.1
Enabling RIP
Refer the Section 4.3 for configuration guidelines and Figure 4-1 for the
Setup. The prerequisite configuration needs to be done in the switches
(FDN40-1 and FDN40- 2) before configuring RIP. RIP is disabled by default.
Setup. The prerequisite configuration needs to be done in the switches
(FDN40-1 and FDN40- 2) before configuring RIP. RIP is disabled by default.