Ulterius Technologies LLC FDN40 Manual De Usuario
CHAPTER 7: IPSEC
Configuration User Manual
151
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
Interface Name : wan0/1
Policy Protocol : any
Policy Action : Apply
In/Out bound SPI : 256 / 257
Security Protocol : ESP
Authentication Algorithm : HMAC-SHA1
Encryption Algo : DES
Anti Replay : Disable
Crypto Session Status : Active
Crypto Session Encr Pkts : 0
Crypto Session Decr Pkts : 0
No.of ACTIVE VPN policies = 1
No.of VPN policies configured = 1
7.3.2.8
Removing Policy from Interface
The policy assigned to the WAN interface is removed for inactivating the
policy. The policy should be inactivated before deleting. Policies assigned to
the WAN interface and activated cannot be deleted.
policy. The policy should be inactivated before deleting. Policies assigned to
the WAN interface and activated cannot be deleted.
To make the policy inactive
1. Enter the Global Configuration mode.
1. Enter the Global Configuration mode.
UltOs# configure terminal
2. Enter the Interface Configuration mode.
UltOs(config)#interface wan 0/1
3. Make the policy inactive.
UltOs(config-if)# no crypto map crypto_map_name
4. Exit from the Interface Configuration mode.
UltOs(config-if)# end
To view the VPN policy parameters
5. View the parameters of the VPN policy.
5. View the parameters of the VPN policy.
UltOs# show crypto map crypto_map_name
VPN Policy Parameters
-------------------------
Policy Name : crypto_map_name
Policy Status : InActive
Policy Type : IKE Pre-shared
Ike Version : v1
AclIndex : 1
Local & Remote Protected N/W's : 192.168.1.0/24 <--
--> 192.168.2.0/24
--> 192.168.2.0/24