Ulterius Technologies LLC FDN40 Manual De Usuario
CHAPTER 13: NTP
Configuration User Manual
252
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
Enter the NTP config mode
UltOs(config)# ntp
Disable the NTP client mode
UltOs(config-ntp)# set ntp client mode disable
Disable the NTP mode
UltOs(config-ntp)# set ntp disable
2. View the NTP related global information.
UltOs# show ntp mode
NTP SERVICE ENABLE CONFIGURATION:
NTP SERVICE ENABLE :
DISABLED
UltOs# show ntp client mode
NTP SERVCIE CONFIGURATION INFORMATION:
NTP CLIENT MODE : DISABLED
13.5.1.3 Configuring the NTP Client Mode
1. Execute the following commands to configure NTP client mode on the
target.
Enter the Global Configuration Mode.
UltOs# configure terminal
Enter NTP config mode.
UltOs(config)# ntp
Enable NTP mode
UltOs(config-ntp)# set ntp {enable | disable}
Enable NTP client mode unicast
UltOs(config-ntp)# set ntp client mode unicast
2. View the NTP client mode related global information
UNICAST MODE
UltOs# show ntp client mode
NTP SERVCIE CONFIGURATION INFORMATION:
NTP CLIENT MODE : UNICAST
13.5.1.4 2.WEB Configuration
13.5.1.4.1
Enabling/ Disabling NTP
NTP can be enabled/disabled can be viewed through WEB interface using
the Basic Settings screen (Navigation - Home-> NTP-> Basic Settings)
the Basic Settings screen (Navigation - Home-> NTP-> Basic Settings)