Vubiq Networks Inc. V10G-L Manual De Usuario
25
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
5.4 Upgrading the Firmware
The internal design of the V10g consists of 2 separate processors that make up the system: the RF processor and
the network switch processor. Each processor runs its own firmware image, and these firmware images are updated
independently when necessary. During a firmware update process, the V10g system will continue to function,
running the currently loaded firmware. Once the firmware update process completes, the V10g system will reboot
itself and load the upgraded firmware image. It is only during the system reboot portion of the firmware upgrade
process that the V10g communication is temporarily interrupted.
the network switch processor. Each processor runs its own firmware image, and these firmware images are updated
independently when necessary. During a firmware update process, the V10g system will continue to function,
running the currently loaded firmware. Once the firmware update process completes, the V10g system will reboot
itself and load the upgraded firmware image. It is only during the system reboot portion of the firmware upgrade
process that the V10g communication is temporarily interrupted.
Upgrading the RF Firmware
The RF processor firmware can be upgraded by selecting the Maintenance > RF Firmware menu item from the web
GUI:
GUI:
First press the Choose File button to browse to the location of an RF firmware image. Then press the Upload button
to start the upgrade process. After the RF firmware image is uploaded, a web page announces that the firmware
update is initiated. After the upload completes and is transferred to the RF system, the firmware is updated and the
system will restart automatically.
to start the upgrade process. After the RF firmware image is uploaded, a web page announces that the firmware
update is initiated. After the upload completes and is transferred to the RF system, the firmware is updated and the
system will restart automatically.
Warning: Do not restart or power off the device during the firmware upgrade process. Doing so may cause
the RF processor to fail to function as a result.
Upgrading the Network Switch Firmware
The network switch firmware can be upgraded using by selecting the Maintenance > Software > Upload menu item
from the web GUI:
from the web GUI:
First press the Choose File button to browse to the location of the desired network switch firmware image. Then
press the Upload button to start the upgrade process. After the network switch firmware image is uploaded, a web
page announces that the firmware update is initiated. After the upload completes and is transferred to the network
switch, the firmware is updated and the system will restart automatically.
press the Upload button to start the upgrade process. After the network switch firmware image is uploaded, a web
page announces that the firmware update is initiated. After the upload completes and is transferred to the network
switch, the firmware is updated and the system will restart automatically.
Warning: Do not restart or power off the device during the firmware upgrade process. Doing so may cause
the network switch to fail to function as a result.